NESONS Software Free Download

07/02/2024
0 26

NESONS 32R590T2 LED TV FLASH DUMP
Download Here

NESONS 32R590T2 LED TV

NESONS 32R590T2 LED TV Software file is shared for repairing purpose. If the NESONS 32R590T2 LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the NESONS 32R590T2 LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and NESONS 32R590T2 LED TV is still dead then check the primary power circuit if found ok then test the sNESONSdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sNESONSdary voltage of the main board of the NESONS 32R590T2 LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in NESONS 32R590T2 LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given NESONS 32R590T2 LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications NESONS 32R590T2 LED TV:
- Make/Brand: NESONS
- Main Board/Chassis: HK.T.RT2957P68 KM0320LDRH000167
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: NESONS
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

NESONS 32R590T2 LED TV dump file is shared below for repairing the firmware problem. NESONS 32R590T2 LED TV has the main board HK.T.RT2957P68 KM0320LDRH000167 installed in it so the SPI Flash file backup saved from working board HK.T.RT2957P68 KM0320LDRH000167. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. HK.T.RT2957P68 KM0320LDRH000167 dump file is shared below for the NESONS 32R590T2 LED TV repairing.

NESONS 32R590T2 LED TV Software download free.

How to Download Free Software for NESONS 32R590T2 LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
06/02/2024
0 19

NESONS 50F550T2 LED TV FLASH DUMP
Download Here

NESONS 50F550T2 LED TV

NESONS 50F550T2 LED TV Software file is shared for repairing purpose. If the NESONS 50F550T2 LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the NESONS 50F550T2 LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and NESONS 50F550T2 LED TV is still dead then check the primary power circuit if found ok then test the sNESONSdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sNESONSdary voltage of the main board of the NESONS 50F550T2 LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in NESONS 50F550T2 LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given NESONS 50F550T2 LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications NESONS 50F550T2 LED TV:
- Make/Brand: NESONS
- Main Board/Chassis: CV3463H-C50 V500HJ1-XRME1
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: NESONS
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

NESONS 50F550T2 LED TV dump file is shared below for repairing the firmware problem. NESONS 50F550T2 LED TV has the main board CV3463H-C50 V500HJ1-XRME1 installed in it so the SPI Flash file backup saved from working board CV3463H-C50 V500HJ1-XRME1. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. CV3463H-C50 V500HJ1-XRME1 dump file is shared below for the NESONS 50F550T2 LED TV repairing.

NESONS 50F550T2 LED TV Software download free.

How to Download Free Software for NESONS 50F550T2 LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
29/01/2024
0 32

NESONS 24R593T2 LED TV FLASH DUMP
Download Here

NESONS 24R593T2 LED TV

NESONS 24R593T2 LED TV Software file is shared for repairing purpose. If the NESONS 24R593T2 LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the NESONS 24R593T2 LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and NESONS 24R593T2 LED TV is still dead then check the primary power circuit if found ok then test the sNESONSdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sNESONSdary voltage of the main board of the NESONS 24R593T2 LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in NESONS 24R593T2 LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given NESONS 24R593T2 LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications NESONS 24R593T2 LED TV:
- Make/Brand: NESONS
- Main Board/Chassis: HK-T.RT2957P65 V236BJ1-P01
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: NESONS
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

NESONS 24R593T2 LED TV dump file is shared below for repairing the firmware problem. NESONS 24R593T2 LED TV has the main board HK-T.RT2957P65 V236BJ1-P01 installed in it so the SPI Flash file backup saved from working board HK-T.RT2957P65 V236BJ1-P01. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. HK-T.RT2957P65 V236BJ1-P01 dump file is shared below for the NESONS 24R593T2 LED TV repairing.

NESONS 24R593T2 LED TV Software download free.

How to Download Free Software for NESONS 24R593T2 LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
29/01/2024
0 18

NESONS 43KF570 LED TV FLASH DUMP
Download Here

NESONS 43KF570 LED TV

NESONS 43KF570 LED TV Software file is shared for repairing purpose. If the NESONS 43KF570 LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the NESONS 43KF570 LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and NESONS 43KF570 LED TV is still dead then check the primary power circuit if found ok then test the sNESONSdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sNESONSdary voltage of the main board of the NESONS 43KF570 LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in NESONS 43KF570 LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given NESONS 43KF570 LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications NESONS 43KF570 LED TV:
- Make/Brand: NESONS
- Main Board/Chassis: HK.T.S2T512CP639
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: NESONS
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

NESONS 43KF570 LED TV dump file is shared below for repairing the firmware problem. NESONS 43KF570 LED TV has the main board HK.T.S2T512CP639 installed in it so the SPI Flash file backup saved from working board HK.T.S2T512CP639. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. HK.T.S2T512CP639 dump file is shared below for the NESONS 43KF570 LED TV repairing.

NESONS 43KF570 LED TV Software download free.

How to Download Free Software for NESONS 43KF570 LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
29/01/2024
0 12

NESONS 32KR650 LED TV FLASH DUMP
Download Here

NESONS 32KR650 LED TV

NESONS 32KR650 LED TV Software file is shared for repairing purpose. If the NESONS 32KR650 LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the NESONS 32KR650 LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and NESONS 32KR650 LED TV is still dead then check the primary power circuit if found ok then test the sNESONSdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sNESONSdary voltage of the main board of the NESONS 32KR650 LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in NESONS 32KR650 LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given NESONS 32KR650 LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications NESONS 32KR650 LED TV:
- Make/Brand: NESONS
- Main Board/Chassis: HK.T.S2T512CP539
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: NESONS
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

NESONS 32KR650 LED TV dump file is shared below for repairing the firmware problem. NESONS 32KR650 LED TV has the main board HK.T.S2T512CP539 installed in it so the SPI Flash file backup saved from working board HK.T.S2T512CP539. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. HK.T.S2T512CP539 dump file is shared below for the NESONS 32KR650 LED TV repairing.

NESONS 32KR650 LED TV Software download free.

How to Download Free Software for NESONS 32KR650 LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
29/01/2024
0 13

NESONS 43PF530 LED TV FLASH DUMP
Download Here

NESONS 43PF530 LED TV

NESONS 43PF530 LED TV Software file is shared for repairing purpose. If the NESONS 43PF530 LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the NESONS 43PF530 LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and NESONS 43PF530 LED TV is still dead then check the primary power circuit if found ok then test the sNESONSdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sNESONSdary voltage of the main board of the NESONS 43PF530 LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in NESONS 43PF530 LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given NESONS 43PF530 LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications NESONS 43PF530 LED TV:
- Make/Brand: NESONS
- Main Board/Chassis: TP.MS3663S.PB801 HV430FHB-N10
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: NESONS
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

NESONS 43PF530 LED TV dump file is shared below for repairing the firmware problem. NESONS 43PF530 LED TV has the main board TP.MS3663S.PB801 HV430FHB-N10 installed in it so the SPI Flash file backup saved from working board TP.MS3663S.PB801 HV430FHB-N10. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. TP.MS3663S.PB801 HV430FHB-N10 dump file is shared below for the NESONS 43PF530 LED TV repairing.

NESONS 43PF530 LED TV Software download free.

How to Download Free Software for NESONS 43PF530 LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
29/01/2024
0 10

NESONS 55KF520 LED TV FLASH DUMP
Download Here

NESONS 55KF520 LED TV

NESONS 55KF520 LED TV Software file is shared for repairing purpose. If the NESONS 55KF520 LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the NESONS 55KF520 LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and NESONS 55KF520 LED TV is still dead then check the primary power circuit if found ok then test the sNESONSdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sNESONSdary voltage of the main board of the NESONS 55KF520 LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in NESONS 55KF520 LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given NESONS 55KF520 LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications NESONS 55KF520 LED TV:
- Make/Brand: NESONS
- Main Board/Chassis: TP.MS3663S.PC821 D55-F2000
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: NESONS
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

NESONS 55KF520 LED TV dump file is shared below for repairing the firmware problem. NESONS 55KF520 LED TV has the main board TP.MS3663S.PC821 D55-F2000 installed in it so the SPI Flash file backup saved from working board TP.MS3663S.PC821 D55-F2000. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. TP.MS3663S.PC821 D55-F2000 dump file is shared below for the NESONS 55KF520 LED TV repairing.

NESONS 55KF520 LED TV Software download free.

How to Download Free Software for NESONS 55KF520 LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
29/01/2024
0 15

NESONS 32KR550 LED TV FLASH DUMP
Download Here

NESONS 32KR550 LED TV

NESONS 32KR550 LED TV Software file is shared for repairing purpose. If the NESONS 32KR550 LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the NESONS 32KR550 LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and NESONS 32KR550 LED TV is still dead then check the primary power circuit if found ok then test the sNESONSdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sNESONSdary voltage of the main board of the NESONS 32KR550 LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in NESONS 32KR550 LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given NESONS 32KR550 LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications NESONS 32KR550 LED TV:
- Make/Brand: NESONS
- Main Board/Chassis: TP.MS3663S.PB818
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: NESONS
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

NESONS 32KR550 LED TV dump file is shared below for repairing the firmware problem. NESONS 32KR550 LED TV has the main board TP.MS3663S.PB818 installed in it so the SPI Flash file backup saved from working board TP.MS3663S.PB818. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. TP.MS3663S.PB818 dump file is shared below for the NESONS 32KR550 LED TV repairing.

NESONS 32KR550 LED TV Software download free.

How to Download Free Software for NESONS 32KR550 LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
29/01/2024
0 11

NESONS 32KR520 LED TV FLASH DUMP
Download Here

NESONS 32KR520 LED TV

NESONS 32KR520 LED TV Software file is shared for repairing purpose. If the NESONS 32KR520 LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the NESONS 32KR520 LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and NESONS 32KR520 LED TV is still dead then check the primary power circuit if found ok then test the sNESONSdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sNESONSdary voltage of the main board of the NESONS 32KR520 LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in NESONS 32KR520 LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given NESONS 32KR520 LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications NESONS 32KR520 LED TV:
- Make/Brand: NESONS
- Main Board/Chassis: TP.MS3663S.PB818 ST3151A05-E
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: NESONS
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

NESONS 32KR520 LED TV dump file is shared below for repairing the firmware problem. NESONS 32KR520 LED TV has the main board TP.MS3663S.PB818 ST3151A05-E installed in it so the SPI Flash file backup saved from working board TP.MS3663S.PB818 ST3151A05-E. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. TP.MS3663S.PB818 ST3151A05-E dump file is shared below for the NESONS 32KR520 LED TV repairing.

NESONS 32KR520 LED TV Software download free.

How to Download Free Software for NESONS 32KR520 LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
29/01/2024
0 19

NESONS 32PR510 LED TV FLASH DUMP
Download Here

NESONS 32PR510 LED TV

NESONS 32PR510 LED TV Software file is shared for repairing purpose. If the NESONS 32PR510 LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the NESONS 32PR510 LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and NESONS 32PR510 LED TV is still dead then check the primary power circuit if found ok then test the sNESONSdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sNESONSdary voltage of the main board of the NESONS 32PR510 LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in NESONS 32PR510 LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given NESONS 32PR510 LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications NESONS 32PR510 LED TV:
- Make/Brand: NESONS
- Main Board/Chassis: TP.S512.PB83
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: NESONS
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

NESONS 32PR510 LED TV dump file is shared below for repairing the firmware problem. NESONS 32PR510 LED TV has the main board TP.S512.PB83 installed in it so the SPI Flash file backup saved from working board TP.S512.PB83. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. TP.S512.PB83 dump file is shared below for the NESONS 32PR510 LED TV repairing.

NESONS 32PR510 LED TV Software download free.

How to Download Free Software for NESONS 32PR510 LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done

NESONS 32R590T2 LED TV

Troubleshooting Guide:

Installation Instructions:

Technical Specifications NESONS 32R590T2 LED TV:

About Mainboard:

NESONS 50F550T2 LED TV

Troubleshooting Guide:

Installation Instructions:

Technical Specifications NESONS 50F550T2 LED TV:

About Mainboard:

NESONS 24R593T2 LED TV

Troubleshooting Guide:

Installation Instructions:

Technical Specifications NESONS 24R593T2 LED TV:

About Mainboard:

NESONS 43KF570 LED TV

Troubleshooting Guide:

Installation Instructions:

Technical Specifications NESONS 43KF570 LED TV:

About Mainboard:

NESONS 32KR650 LED TV

Troubleshooting Guide:

Installation Instructions:

Technical Specifications NESONS 32KR650 LED TV:

About Mainboard:

NESONS 43PF530 LED TV

Troubleshooting Guide:

Installation Instructions:

Technical Specifications NESONS 43PF530 LED TV:

About Mainboard:

NESONS 55KF520 LED TV

Troubleshooting Guide:

Installation Instructions:

Technical Specifications NESONS 55KF520 LED TV:

About Mainboard:

NESONS 32KR550 LED TV

Troubleshooting Guide:

Installation Instructions:

Technical Specifications NESONS 32KR550 LED TV:

About Mainboard:

NESONS 32KR520 LED TV

Troubleshooting Guide:

Installation Instructions:

Technical Specifications NESONS 32KR520 LED TV:

About Mainboard:

NESONS 32PR510 LED TV

Troubleshooting Guide:

Installation Instructions:

Technical Specifications NESONS 32PR510 LED TV:

About Mainboard:

Adblock Detected