IZUMI Software Free Download

06/08/2023
0 549

IZUMI TLE32H750B LED TV FLASH DUMP
Download Here

IZUMI TLE32H750B LED TV

IZUMI TLE32H750B LED TV Software file is shared for repairing purpose. If the IZUMI TLE32H750B LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the IZUMI TLE32H750B LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and IZUMI TLE32H750B LED TV is still dead then check the primary power circuit if found ok then test the sIZUMIdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sIZUMIdary voltage of the main board of the IZUMI TLE32H750B LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in IZUMI TLE32H750B LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given IZUMI TLE32H750B LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications IZUMI TLE32H750B LED TV:
- Make/Brand: IZUMI
- Main Board/Chassis: T.MS18VG.81B 12145
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: IZUMI
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

IZUMI TLE32H750B LED TV dump file is shared below for repairing the firmware problem. IZUMI TLE32H750B LED TV has the main board T.MS18VG.81B 12145 installed in it so the SPI Flash file backup saved from working board T.MS18VG.81B 12145. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. T.MS18VG.81B 12145 dump file is shared below for the IZUMI TLE32H750B LED TV repairing.

IZUMI TLE32H750B LED TV Software download free.

How to Download Free Software for IZUMI TLE32H750B LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
06/08/2023
0 17

IZUMI TLE19H750B LED TV FLASH DUMP
Download Here

IZUMI TLE19H750B LED TV

IZUMI TLE19H750B LED TV Software file is shared for repairing purpose. If the IZUMI TLE19H750B LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the IZUMI TLE19H750B LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and IZUMI TLE19H750B LED TV is still dead then check the primary power circuit if found ok then test the sIZUMIdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sIZUMIdary voltage of the main board of the IZUMI TLE19H750B LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in IZUMI TLE19H750B LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given IZUMI TLE19H750B LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications IZUMI TLE19H750B LED TV:
- Make/Brand: IZUMI
- Main Board/Chassis: T.MS18VG.62B 11505
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: IZUMI
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

IZUMI TLE19H750B LED TV dump file is shared below for repairing the firmware problem. IZUMI TLE19H750B LED TV has the main board T.MS18VG.62B 11505 installed in it so the SPI Flash file backup saved from working board T.MS18VG.62B 11505. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. T.MS18VG.62B 11505 dump file is shared below for the IZUMI TLE19H750B LED TV repairing.

IZUMI TLE19H750B LED TV Software download free.

How to Download Free Software for IZUMI TLE19H750B LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
06/08/2023
0 13

IZUMI TLE22F205W LED TV FLASH DUMP
Download Here

IZUMI TLE22F205W LED TV

IZUMI TLE22F205W LED TV Software file is shared for repairing purpose. If the IZUMI TLE22F205W LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the IZUMI TLE22F205W LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and IZUMI TLE22F205W LED TV is still dead then check the primary power circuit if found ok then test the sIZUMIdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sIZUMIdary voltage of the main board of the IZUMI TLE22F205W LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in IZUMI TLE22F205W LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given IZUMI TLE22F205W LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications IZUMI TLE22F205W LED TV:
- Make/Brand: IZUMI
- Main Board/Chassis: HK-T.MST182V01
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: IZUMI
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

IZUMI TLE22F205W LED TV dump file is shared below for repairing the firmware problem. IZUMI TLE22F205W LED TV has the main board HK-T.MST182V01 installed in it so the SPI Flash file backup saved from working board HK-T.MST182V01. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. HK-T.MST182V01 dump file is shared below for the IZUMI TLE22F205W LED TV repairing.

IZUMI TLE22F205W LED TV Software download free.

How to Download Free Software for IZUMI TLE22F205W LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
06/08/2023
0 12

IZUMI TLE24IF600B LED TV FLASH DUMP
Download Here

IZUMI TLE24IF600B LED TV

IZUMI TLE24IF600B LED TV Software file is shared for repairing purpose. If the IZUMI TLE24IF600B LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the IZUMI TLE24IF600B LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and IZUMI TLE24IF600B LED TV is still dead then check the primary power circuit if found ok then test the sIZUMIdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sIZUMIdary voltage of the main board of the IZUMI TLE24IF600B LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in IZUMI TLE24IF600B LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given IZUMI TLE24IF600B LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications IZUMI TLE24IF600B LED TV:
- Make/Brand: IZUMI
- Main Board/Chassis: MSTV59XUS-V1.0
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: IZUMI
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

IZUMI TLE24IF600B LED TV dump file is shared below for repairing the firmware problem. IZUMI TLE24IF600B LED TV has the main board MSTV59XUS-V1.0 installed in it so the SPI Flash file backup saved from working board MSTV59XUS-V1.0. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. MSTV59XUS-V1.0 dump file is shared below for the IZUMI TLE24IF600B LED TV repairing.

IZUMI TLE24IF600B LED TV Software download free.

How to Download Free Software for IZUMI TLE24IF600B LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
06/08/2023
0 12

IZUMI TLE19H212B LED TV FLASH DUMP
Download Here

IZUMI TLE19H212B LED TV

IZUMI TLE19H212B LED TV Software file is shared for repairing purpose. If the IZUMI TLE19H212B LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the IZUMI TLE19H212B LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and IZUMI TLE19H212B LED TV is still dead then check the primary power circuit if found ok then test the sIZUMIdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sIZUMIdary voltage of the main board of the IZUMI TLE19H212B LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in IZUMI TLE19H212B LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given IZUMI TLE19H212B LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications IZUMI TLE19H212B LED TV:
- Make/Brand: IZUMI
- Main Board/Chassis: JHST140703-1
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: IZUMI
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

IZUMI TLE19H212B LED TV dump file is shared below for repairing the firmware problem. IZUMI TLE19H212B LED TV has the main board JHST140703-1 installed in it so the SPI Flash file backup saved from working board JHST140703-1. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. JHST140703-1 dump file is shared below for the IZUMI TLE19H212B LED TV repairing.

IZUMI TLE19H212B LED TV Software download free.

How to Download Free Software for IZUMI TLE19H212B LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
06/08/2023
0 12

IZUMI TLE40F212B LED TV FLASH DUMP
Download Here

IZUMI TLE40F212B LED TV

IZUMI TLE40F212B LED TV Software file is shared for repairing purpose. If the IZUMI TLE40F212B LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the IZUMI TLE40F212B LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and IZUMI TLE40F212B LED TV is still dead then check the primary power circuit if found ok then test the sIZUMIdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sIZUMIdary voltage of the main board of the IZUMI TLE40F212B LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in IZUMI TLE40F212B LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given IZUMI TLE40F212B LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications IZUMI TLE40F212B LED TV:
- Make/Brand: IZUMI
- Main Board/Chassis: 090-59S090-70
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: IZUMI
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

IZUMI TLE40F212B LED TV dump file is shared below for repairing the firmware problem. IZUMI TLE40F212B LED TV has the main board 090-59S090-70 installed in it so the SPI Flash file backup saved from working board 090-59S090-70. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. 090-59S090-70 dump file is shared below for the IZUMI TLE40F212B LED TV repairing.

IZUMI TLE40F212B LED TV Software download free.

How to Download Free Software for IZUMI TLE40F212B LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
05/08/2023
0 14

IZUMI TLE19H205B LED TV FLASH DUMP
Download Here

IZUMI TLE19H205B LED TV

IZUMI TLE19H205B LED TV Software file is shared for repairing purpose. If the IZUMI TLE19H205B LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the IZUMI TLE19H205B LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and IZUMI TLE19H205B LED TV is still dead then check the primary power circuit if found ok then test the sIZUMIdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sIZUMIdary voltage of the main board of the IZUMI TLE19H205B LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in IZUMI TLE19H205B LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given IZUMI TLE19H205B LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications IZUMI TLE19H205B LED TV:
- Make/Brand: IZUMI
- Main Board/Chassis: LA.MV9.N
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: IZUMI
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

IZUMI TLE19H205B LED TV dump file is shared below for repairing the firmware problem. IZUMI TLE19H205B LED TV has the main board LA.MV9.N installed in it so the SPI Flash file backup saved from working board LA.MV9.N. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. LA.MV9.N dump file is shared below for the IZUMI TLE19H205B LED TV repairing.

IZUMI TLE19H205B LED TV Software download free.

How to Download Free Software for IZUMI TLE19H205B LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
05/08/2023
0 908

IZUMI TLE32F300B LED TV FLASH DUMP
Download Here

IZUMI TLE32F300B LED TV

IZUMI TLE32F300B LED TV Software file is shared for repairing purpose. If the IZUMI TLE32F300B LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the IZUMI TLE32F300B LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and IZUMI TLE32F300B LED TV is still dead then check the primary power circuit if found ok then test the sIZUMIdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sIZUMIdary voltage of the main board of the IZUMI TLE32F300B LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in IZUMI TLE32F300B LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given IZUMI TLE32F300B LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications IZUMI TLE32F300B LED TV:
- Make/Brand: IZUMI
- Main Board/Chassis: T.MS6M48.6B
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: IZUMI
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

IZUMI TLE32F300B LED TV dump file is shared below for repairing the firmware problem. IZUMI TLE32F300B LED TV has the main board T.MS6M48.6B installed in it so the SPI Flash file backup saved from working board T.MS6M48.6B. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. T.MS6M48.6B dump file is shared below for the IZUMI TLE32F300B LED TV repairing.

IZUMI TLE32F300B LED TV Software download free.

How to Download Free Software for IZUMI TLE32F300B LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
05/08/2023
0 15

IZUMI TLE32F400B LED TV FLASH DUMP
Download Here

IZUMI TLE32F400B LED TV

IZUMI TLE32F400B LED TV Software file is shared for repairing purpose. If the IZUMI TLE32F400B LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the IZUMI TLE32F400B LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and IZUMI TLE32F400B LED TV is still dead then check the primary power circuit if found ok then test the sIZUMIdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sIZUMIdary voltage of the main board of the IZUMI TLE32F400B LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in IZUMI TLE32F400B LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given IZUMI TLE32F400B LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications IZUMI TLE32F400B LED TV:
- Make/Brand: IZUMI
- Main Board/Chassis: T.MS6M48.6B
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: IZUMI
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

IZUMI TLE32F400B LED TV dump file is shared below for repairing the firmware problem. IZUMI TLE32F400B LED TV has the main board T.MS6M48.6B installed in it so the SPI Flash file backup saved from working board T.MS6M48.6B. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. T.MS6M48.6B dump file is shared below for the IZUMI TLE32F400B LED TV repairing.

IZUMI TLE32F400B LED TV Software download free.

How to Download Free Software for IZUMI TLE32F400B LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done
05/08/2023
0 27

IZUMI TL32H700B LED TV FLASH DUMP
Download Here

IZUMI TL32H700B LED TV

IZUMI TL32H700B LED TV Software file is shared for repairing purpose. If the IZUMI TL32H700B LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then Software file can be loaded.

Troubleshooting Guide:

If the IZUMI TL32H700B LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

If both are found ok and IZUMI TL32H700B LED TV is still dead then check the primary power circuit if found ok then test the sIZUMIdary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load Software file the TV will be normal after repairing and if the standby light is indicating and the TV not leaving standby or not responding remote and also all the primary and sIZUMIdary voltage of the main board of the IZUMI TL32H700B LED TV are tested and found accurate then write Software file, hope the issue will be resolved by rewriting flash memory.

Installation Instructions:

For writing Software file in IZUMI TL32H700B LED TV board, first of all save the backup of old dump then erase the flash chip. After it write the given IZUMI TL32H700B LED TV Software and then verify after completion. if verifies successfully then resold it again and check. In some cases the Software file is saved from the same board but the remote control may not match. In such cases use universal remote control.

Technical Specifications IZUMI TL32H700B LED TV:
- Make/Brand: IZUMI
- Main Board/Chassis: T.MS18VG.21B 11513
- Board Type:
- Power Source:
- Rated Power Consumption:
- Panel Info:
- T-CON:
- Screen Resolution:
- Main Processor/Chipset:
- SPI Flash:
- Tuner:
- Firmware Type: SPI Dump
- Product User: IZUMI
- Product Model:
- Factory Code:
Special Note:

The attached firmware is backup dump file and can be loaded by a programming tool in case when LED TV stuck on Logo or Boot Screen or not leave the standby position. Not for Update purpose if LED TV is working Normal. Always match Main board number before writing the Software File. If you are not a technician or do not have any experience of repairing electronic devices then do not play with this. In case of wrong file loaded, board may be dead. Admin Team is not responsible in case of any damage/loss.

Click for more Softwares TV

About Mainboard:

IZUMI TL32H700B LED TV dump file is shared below for repairing the firmware problem. IZUMI TL32H700B LED TV has the main board T.MS18VG.21B 11513 installed in it so the SPI Flash file backup saved from working board T.MS18VG.21B 11513. Mostly in LED TVs universal board is installed which has the integration of backlight driver board, ATV Tuner Module and Power Circuit board. T.MS18VG.21B 11513 dump file is shared below for the IZUMI TL32H700B LED TV repairing.

IZUMI TL32H700B LED TV Software download free.

How to Download Free Software for IZUMI TL32H700B LED TV:

1. Click on the file part or Download Link, New Tab will open
2. Click on Free Download or Premium Download as per your account type
3. Check I’m not robot and wait for countdown timer to end
4. Click on Create Download Link
5. Ignore Popups and wait for Preparing Download Link
6. Click on Click Here To Download. Done. Click on Click Here To Download. Done